Description

Model ALCAM provides inlet connection for connecting the air suction vacuum line. However, air sampling pump unit also can be supplied as an optional accessory. It is expected that the flow range should be between 40 to 70 LPM. Rotary vanes based dry pump with open air suction capacity up to 125 LPM is supplied for 24 hours nonstop operation as an optional accessory.
Connectivity of ALCAM to network or PC is provided through RS-485 / Ethernet. Modbus based Data Transfer software is supplied as an option. MODBUS protocol based registers’ output is made available for data transfer.

Wall mountable Continuous Air Monitoring System model ALCAM is supplied in rack. This rack (depth 23 cms) contains the 2” dia ZnS(Ag) Alpha detector on 2” dia PMT, Filter holder assembly, air flow measuring unit and electronic unit for display of Alpha activity.

Specifications (ALCAM System)
| Parameter | ALCAM |
|---|---|
| No. of Channel | Alpha |
| Detector | 2″ dia ZnS(Ag) Scintillator on 2″ dia PMT |
| Filter Paper Arrangement | 2″ dia filter paper mounting, with easy-to-replace filter holder in sampling system for Alpha Channel |
| Flow Measurement | Electronic or by Rotameter (0 to 100 LPM Range) |
| Air Sampling | Continuous rated air sampling pump (100 LPM) for Alpha channel |
| HV supply | 0 to 1000V preset for alpha channel |
| Display | 6 digit LED for CPM |
| 4 x 20 Char large LCD for Bq/M3,Flow,Alarm Levels | |
| Ranges | 50, 500, 5000 or 50000 CPM settable |
| Calibration | Air Flow and Counting Efficiency |
| Alarms | Green / Red Cluster LEDs with audio alarm |
| Alarm Setting | Warning and High CPM Alarm |
| Low and High for Air Flow | |
| Outputs | Potential free Relay contacts, |
| 4-20mA Output | |
| RS-485(Modbus) or Ethernet | |
| Air Flow Pump (optional) | Independent pump 126 LPM open flow with silencer |
| Flow Control | By Vent Valve with inlet air filter |
| Mechanical Enclosure | Powder coated Wall Mounting Rack ( 60 cm L x 23 cm W x 47 cm ) |
| Power | 230V / 50 Hz AC Mains |
Due to continuous R&D, specifications are likely to change without notice




